Samsung DynaFlat TX-P3076WH - Manual (Page 44)

Alternate method:
Simply press the TV/VIDEO
or TV/COMP. button on the
remote control to select an
External Signal Source.
TV/VIDEO : Video 1, Video 2,
Video 3, S-Video.
TV/COMP. : Component 1,
Component 2, DVI.
44
O
P E R AT I O N
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment,
such as VCR, DVD, Set-Top box and the TV source (broadcast or cable).
Setting the Signal Source
1
Press the MENU button.
Press the ENTER button to
select “Input”.
2
Press the ENTER button to
select “Source List”.
3
Press the … or † button to
select signal source, then
press the ENTER button
When you connect equipment to the TV, you can choose
between the following sets of jacks : Video 1, S-Video on
the TV’s side panel or Video 1, Video 2, Video 3, S-Video,
Component 1, Component 2 or DVI on the TV’s rear panel.
Source List √
Edit Name √
T V Input
Source List √
Edit Name √
T V Input
TV
WISELINK : - - - -
Video1 : - - - -
Video2 : - - - -
Video3 : - - - -
S-Video : - - - -
▼ More
T V Source List
Video1
DVI
AA68-03388A-00_eng_Chapter3 4/21/04 5:23 PM Page 44