Specifications, Design, Drive units – Sunfire HRS-SAT4 User Manual
Page 13: Frequency response, Crossover frequency, Maximum power, Minimum power, Sensitivity, Maximum output, Impedance
User's Manual
13
Specifications
Design
way, High Pressure
Drive Units
HF: 1-inch ring radiating tweeter
LF: 4.5-inch High Back-emf
Frequency Response
95 Hz to 30 kHz
Crossover Frequency
1.5 kHz
Maximum Power
00 watts
Minimum Power
5 watts
Sensitivity
(2.83 V/1 meter)
88 dB
Maximum Output
111 dB
Impedance
6 ohms nominal
Connections
1 pair of gold plated 5-way terminals
Dimensions
(Maximum dimensions, including grille)
HRS-SAT4
Height
8.0" (203.2 mm)
Width
5.45" (138.4 mm)
Depth
6.0" (154.2 mm)
Weight
7.0 lb. (3.2 kg)
HRS-SAT4C
Height
5.45" (138.4 mm)
Width
13.2" (335.3 mm)
Depth
6.0" (152.4 mm)
Weight
12.0 lb. (5.4 kg)
© 2008 Sunfire, LLC.
All rights reserved. Sunfire, LLC reserves
the right to improve its products at any time.
Therefore, specifications are subject to
change without notice.
Manual 913-150-00 Rev A