Sony WEGA KV-27FS100L - Manual (Page 36)

28
Operating Instructions
Auto Program Perform Auto Program whenever setting up your TV.
Auto Program will search for available channels and program receivable channels.
1 Press .
2 Press g to highlight Channel menu.
3 Press f to highlight Cable. Press to select.
4 Press F or f to highlight On or Off according to how you connected your TV.
Press to select.
5 Press f to highlight Auto Program. Press to search for channels.
6 After Auto Program finishes, press to exit.
Channel
Skip/Add Use this feature after you run Auto Program to skip unwanted channels or add
new ones.
1
Use the F or f buttons to highlight the position of the desired channel, then
press .
2 Use the F or f buttons to highlight Skip or Add, then press .
3 Press G to return to the Channel menu or press to exit.
Channel
Label
Label up to 40
channels with
their call letters
1 Press , then use the F or f buttons until you reach the desired channel
number.
2 Press to activate the channel.
3 Press f to highlight Label, then press . Use the F or f buttons to display
the first call letter or number of the label. Press to select. Repeat this
process until you finish selecting all the call letters.
4 When finished, press to activate.
5 Press G to return to the Channel menu or press to exit.
✍
Press CH + or CH - to skip over channels that have been skipped. You can still use the --9 buttons
to directly tune to skipped channels.