Sportline CARDIO 630 HEART RATE MONITOR SP1448IS01SPO - Manual (Page 6)

CARDIO 630 HEART RATE MONITOR
10 11
The Chest Strap Transmitter provides constant heart rate
information throughout the duration of your workout. To ensure
a proper heart rate display, the chest transmitter must be prop-
erly adjusted. Snap the plastic tabs at the end of the elastic belt
into the holes at the end of the transmitter and adjust the strap
so that the transmitter fi ts tightly below the pectoral muscles,
as shown in the drawing.
NOTE: Users with signifi cant chest hair may have a problem obtaining
contact between the transmitter electrodes and their skin, resulting in poor
performance. It may be necessary for these individuals to shave the area of
their chest beneath the transmitter.
NOTE: In dry and cold climates it may take a few minutes for a layer of
perspiration to form between the chest strap and the skin. Moistening the
electrodes with saliva or ECG conductive gel can speed up this process.
CODING THE CHEST STRAP TRANSMITTER WEARING THE CHEST STRAP TRANSMITTER
ELECTRODES
3
2
4
The Sportline Cardio 630 features a coded chest strap trans-
mitter with multiple channels to eliminate interference from
other heart rate monitors when exercising in close proximity to
other people, such as a group fi tness class. The monitor and
chest transmitter strap are already coded and paired. If you are
experiencing interference and need to select an alternate code,
follow these steps:
1. PRESS THE BUTTON ON THE CHEST STRAP
TRANSMITTER to select alternate
channel.
2. While wearing the chest transmitter
strap,
PRESS the HEART RATE key to
enter Heart Rate/Exercise mode.
3. PRESS & HOLD the HEART RATE Key.
“Learn” will appear in the top line of the
display.
4. When the monitor and chest strap
transmitter are successfully paired,
“CODED” will appear in the monitor’s
display.
1 PRESS BUTTON
SP1448IS01SPO.indd 10-11 SP1448IS01SPO.indd 10-11 6/10/11 12:19 PM 6/10/11 12:19 PM