Sterling Plumbing Dual-Flush Close-Coupled Toilet 402027 - Manual (Page 3)

1. Remove the Existing Toilet
Turn off the water supply.
Flush the toilet, then sponge out all remaining water from the
tank.
Disconnect the supply shut-off valve (if present), and remove the
old tank and bowl.
Remove the old wax seal from the floor with a putty knife.
Replace the old T-bolts with the new 5/16 ″ diameter T-bolts.
CAUTION: Risk of hazardous gases. If the new toilet is not
installed immediately, temporarily stuff a rag in the closet flange.
T-Bolts
Closet Flange
Scrape off the
old wax seal
Sterling 3 1035429-2-D