1 overview of setup utility menu functions, Proceed as follows, Rotate the multi control knob to display “exec off – Sony DVW-2000 User Manual
Page 138: The monitor screen display changes as follows

13-1
Overview of Setup Utility Menu Functions
Chapter 13
Setup Utility Menu Functions
13-2
Chapter 13
Setup Utility Menu Functions
5
Press the F5 (SET) button.
The selected file is downloaded.
Note
Do not do any of the following during the download.
Doing so can corrupt the ROM software of this unit,
making the unit unable to download normally.
• Power the unit off.
• Remove or insert a memory stick.
• Remove or load a cassette.
To upload a file to a memory stick
Proceed as follows.
1
Press the F2 (UPLOAD) button.
The menu display changes, allowing you to
execute the upload. The name of the currently
selected file is flashing on the screen.
SUP
UTL
EXIT
SET
UPLOAD SETUP - DBMNRXXX.SUP
HOME
F1
F2
F3
F4
F5
F6
2
With the HOME button held down, rotate the
MULTI CONTROL knob to select the file to
upload.
3
Rotate the MULTI CONTROL knob to display
“EXEC OFF”.
SUP
UTL
EXIT
SET
UPLOAD SETUP - EXEC OFF
HOME
F1
F2
F3
F4
F5
F6
4
With the HOME button held down, rotate the
MULTI CONTROL knob to switch EXEC OFF to
EXEC ON.
SUP
UTL
EXIT
SET
UPLOAD SETUP - EXEC ON
HOME
F1
F2
F3
F4
F5
F6
When you want to redo a file selection, rotate the
MULTI CONTROL knob to display the file name
again, then go back to step 2.
The monitor screen display changes as follows.
ROM TO STICK
File:
EXECUTE - ON
XXXXXXXX.XXX
SETUP MENU UPLOAD
STICK <- VTR
5
Press the F5 (SET) button.
The selected file is uploaded.
Note
Do not do any of the following during the upload.
Doing so can corrupt the ROM software of this unit,
making the unit unable to download normally.
• Power the unit off.
• Remove or insert a memory stick.
• Remove or load a cassette.
To format a memory stick
1
Press the F3 (FORMAT) button.
The menu display changes, allowing you to
execute formatting.
SUP
UTL
EXIT
SET
FORMAT - EXEC OFF
HOME
F1
F2
F3
F4
F5
F6
2
With the HOME button held down, rotate the
MULTI CONTROL knob to switch EXEC OFF to
EXEC ON.
SUP
UTL
EXIT
SET
FORMAT - EXEC ON
HOME
F1
F2
F3
F4
F5
F6
The monitor screen display changes as follows.
FORMAT STICK
All data in the MEMORY
STICK will be deleted.
EXECUTE - ON
to MS-DOS
CAUTION!!