Sony CMT-GS10 - Manual (Page 2)

CMT-GS10.GB.2-899-568-13(1)
Other Operations
Creating your own CD program
(Program Play)
1 Press CD  to select the CD function.
2 Press PLAY MODE  repeatedly until “PGM” appears
while the player is stopped.
3 Press / (or / on the unit) 
repeatedly until the desired track or file number
appears.
When programing MP3 files, press +/ 
repeatedly to select the desired folder, and then select
the desired file.
Selected track or file number
4 Press ENTER  to add the track or file to the
program.
5 Repeat steps 3 through 4 to program additional
tracks or files, up to a total of 15 tracks or files.
6 To play your program of tracks or files, press  (or
CD  on the unit) .
The program remains available until you open the disc
tray. To play the same program again, select the CD
function, and press  (or CD  on the unit) .
To cancel Program Play
Press PLAY MODE  repeatedly until “PGM”
disappears while the player is stopped.
To delete the last track or file of the program
Press CLEAR  on the remote while the player is
stopped.
To view program information, such as total
track number of the program
Press DISPLAY  repeatedly.
Presetting radio stations
You can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1 Tune in the desired station (See “Listening to the
radio ”).
2 Press TUNER MEMORY .
Preset number
3 Press +/ (or TUNING + or  on the unit) 
repeatedly to select your desired preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4 Press ENTER .
5 Repeat steps 1 through 4 to store other stations.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6 To call up a preset radio station, press TUNING
MODE  repeatedly until “PRESET” appears, and
then press +/ (or TUNING + or  on the unit) 
repeatedly to select the desired preset number.
Using the Timers
The system offers two timer functions. If you use both
timers, the Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. This function works even if
the clock is not set.
Press SLEEP  repeatedly. If you select “AUTO,” the
system automatically turns off after the current disc stops
or in 100 minutes.
Play Timer:
You can wake up to CD or tuner at a preset time.
Use buttons on the remote to control the Play Timer.
Make sure you have set the clock.
1 Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/  to adjust the volume.
To start from a specific CD track or MP3 file, create
your own CD program.
2 Press CLOCK/TIMER SET .
3 Press /  repeatedly to select “PLAY,” and
then press ENTER .
“ON TIME” appears, and the hour indication flashes.
4 Set the time to start playing.
Press /  repeatedly to set the hour, and
then press ENTER .
The minute indication flashes. Use the procedure
above to set the minutes.
5 Use the same procedure as in step 4 to set the time
to stop playing.
6 Select the sound source.
Press /  repeatedly until the desired
sound source appears, and then press ENTER . The
display shows the timer settings.
7 Press   to turn off the system.
If the system is on at the preset time, the Play Timer
will not play.
To activate or check the timer again
Press CLOCK/TIMER SELECT , press / 
repeatedly until “PLAY” appears, and then press ENTER
.
To cancel the timer
Repeat the same procedure as above until “OFF” appears,
and then press ENTER .
To change the setting
Start over from step 1.
Tip
The Play Timer setting remains as long as the setting is not canceled
manually.
1 Make sure the power cord and speaker cords are
correctly and firmly connected.
2 Find your problem in the checklist below, and take
the indicated corrective action.
If the issue persists, contact your nearest Sony dealer.
If the STANDBY indicator flashes
Immediately unplug the power cord, and check the
following item.
 If your system has a voltage selector, is the voltage
selector set to the correct voltage?
After the STANDBY indicator  on the unit stops
flashing, reconnect the power cord, and turn on the
system. If the issue persists, contact your nearest Sony
dealer.
General
The system unexpectedly shuts off while
operating.
 Are the + and  speaker cords short-circuited?
Make sure the speaker cords are correctly connected.
There is no sound.
 Are the + and  speaker cords short-circuited?
 Connect only the supplied speakers.
 Do not obstruct the ventilation holes.
Sound comes from one channel, or the left and
right volumes are unbalanced.
 Place the speakers as symmetrically as possible.
 Connect only the supplied speakers.
Severe hum or noise.
 Move the system away from sources of noise.
 Connect the system to a different wall socket.
 Install a noise filter (available separately) to the power
cord.
The remote does not function.
 Remove any obstacles between the remote and the
remote sensor  on the unit, and position the unit
away from fluorescent lights.
 Point the remote at the system’s sensor.
 Move the remote closer to the system.
CD/MP3 player
The sound skips, or the disc will not play.
 Wipe the disc clean, and replace it.
 Move the system to a location away from vibration (for
example, on top of a stable stand).
 Move the speakers away from the system, or place them
on separate stands. At high volume, speaker vibration
may cause the sound to skip.
Play does not start from the first track.
 Return to Normal Play by pressing PLAY MODE 
repeatedly until both “PGM” and “SHUF” disappear.
Starting playback takes more time than usual.
 The following discs take a longer time to start playback.
 a disc recorded with a complicated tree structure.
 a disc recorded in multisession mode.
 a disc that has not been finalized (a disc to which data
can be added).
 a disc that has many folders.
The disc tray does not open and “LOCKED”
appears.
 Contact your Sony dealer or local authorized Sony
service facility.
Tuner
Severe hum or noise, or stations cannot be
received. (“TUNED” or “STEREO” flashes on the
display.)
 Connect the antenna properly.
 Find a location and an orientation that provide good
reception, and then set up the antenna again.
 Keep the antenna away from the speaker cords and the
power cord to avoid picking up noise.
 Turn off nearby electrical equipment.
To change the AM tuning interval
The AM tuning interval is factory-preset to 9 kHz or
10 kHz (for some areas: this function is not available on
the European and Russian models).
Use buttons on the unit to change the AM tuning
interval.
1 Tune in any AM station, and then turn off the
system.
2 Press DISPLAY  to display the clock.
3 While holding down TUNING + , press  .
All the AM preset stations are erased. To reset the
interval to the factory preset, repeat the procedure.
To improve tuner reception
Turn off CD player power by using the CD power
management function. By default, CD power is turned on.
1 Press CD (or FUNCTION repeatedly)  to select the
CD function.
2 Press   to turn off the system.
3 After “STANDBY” stops flashing, press DISPLAY 
to display the clock and then press   while
holding down   on the unit.
“CD POWER OFF” appears. With CD player power
turned off, disc access time is increased. To turn on
CD player power, repeat the procedure until “CD
POWER ON” appears.
Troubleshooting To reset the system to factory settings
If the system still does not operate properly, reset the
system to factory settings.
Use buttons on the unit to reset the unit to its factory
default settings.
1 Disconnect and reconnect the power cord, and then
turn on the system.
2 Press  , DSGX , and   at the same time.
All user-configured settings, such as preset radio
stations, timer, and the clock, are deleted.
Messages
COMPLETE : The preset operation ended normally.
FULL : You tried to program more than 15 tracks or files
(steps).
NO DISC : There is no disc in the player, or you have
loaded a disc that cannot be played.
NO STEP : All of the programed tracks have been erased.
OVER : You have reached the end of the disc while
pressing   during playback or pause.
PUSH SELECT : You tried to set the clock or timer during
timer operation.
PUSH STOP : You pressed PLAY MODE  during
playback.
READING : The system is reading information from the
disc. Some buttons are not available.
SET CLOCK : You tried to select the timer when the clock
is not set.
SET TIMER : You tried to select the timer when the Play
Timer is not set.
TIME NG : The Play Timer start and end times are set to
the same time.
Display examples
Display indicates
2 (two)
5 (five)
6 (six)
8 (eight)
0 (zero)
A
B
D
G
H
K
M
O
Q
R
S
Z
|
”
$
%
,
.
?
@
^
Precautions
Discs that this system CAN play
 Audio CD
 CD-R/CD-RW (audio data/MP3 files)
Discs that this system CANNOT play
 CD-ROM
 CD-R/CD-RW other than those recorded in music CD
format or MP3 format conforming to ISO9660 Level
1/Level 2, Joliet or multisession
 CD-R/CD-RW recorded in multisession that have not
ended by “closing the session”
 CD-R/CD-RW of poor recording quality, CD-R/CD-
RW that have scratches or are dirty, or CD-R/CD-RW
recorded with an incompatible recording device
 CD-R/CD-RW which is finalized incorrectly
 Discs containing files other than MPEG 1 Audio Layer-
3 (MP3) files
 Discs of non-standard shape (for example, heart,
square, star)
 Discs that have adhesive tape, paper, or sticker attached
to them
 Rental or used discs with attached seals where the glue
extends beyond the seal
 Discs that have labels printed using ink that feels tacky
when touched
Notes on discs
 Before playing, wipe the disc with a cleaning cloth from
the center out to the edge.
 Do not clean discs with solvents, such as benzine
thinner, or commercially available cleaners or anti-
static spray intended for vinyl LPs.
 Do not expose discs to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in
direct sunlight.
On safety
 The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall socket,
even if the unit itself has been turned off.
 Completely disconnect the power cord (mains lead)
from the wall socket (mains) if it is not going to be used
for an extended period of time. When unplugging the
unit, always grip the plug. Never pull the cord itself.
 Should any solid object or liquid get into the system,
unplug the system, and have it checked by qualified
personnel before operating it again.
 The AC power cord can be changed only by a qualified
service facility.
On placement
 Do not place the system in an inclined position or in
locations that are extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation, or subject to
vibration, direct sunlight or a bright light.
 Be careful when placing the unit or speakers on
surfaces that have been specially treated (for example,
with wax, oil, polish) as staining or discoloration of the
surface may result.
 If the system is brought directly from a cold to a warm
location or is placed in a very damp room, moisture
may condense on the lens inside the CD player, and
cause the system to malfunction. In this situation,
remove the disc, and leave the system turned on for
about an hour until the moisture evaporates.
On heat buildup
 Heat buildup on the unit during operation is normal
and is not cause for alarm.
 Do not touch the cabinet if it has been used
continuously at a high volume because the cabinet may
have become hot.
 Do not obstruct the ventilation holes.
On the speaker system
This speaker system is not magnetically shielded, and
the picture on nearby TV sets may become magnetically
distorted. In this situation, turn off the TV, wait 15 to 30
minutes, and turn it back on.
If there is no improvement, move the speakers far away
from the TV.
Cleaning the cabinet
Clean this system with a soft cloth slightly moistened
with a mild detergent solution. Do not use any type
of abrasive pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
Specifications
Main unit
Amplifier section
Canadian model:
Continuous RMS power output (reference): 50 + 50 W (6 ohms at 1 kHz,
10% THD)
European and Russian models:
DIN power output (rated): 45 + 45 W (6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 50 + 50 W (6 ohms at 1 kHz,
10% THD)
Music power output (reference): 75 + 75 W
Other models:
The following are measured at 240 V AC, 50/60 Hz (Australian model), 220 V AC, 60 Hz (Korean model), 220 V AC, 50/60 Hz (Argentine model),
127 V AC, 60 Hz (Mexican Model), 120 V or 240 V AC, 50/60 Hz (other
models)
DIN power output (rated): 45 + 45 W (6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 50 + 50 W (6 ohms at 1 kHz,
10% THD)
Inputs
AUDIO IN (stereo mini jack): Sensitivity 775 mV, impedance 22 kilohms
Outputs
PHONES (stereo mini jack): Accepts headphones with an impedance of
8 ohms or more
SPEAKER: Accepts impedance of 6 ohms
CD player section
System: Compact disc and digital audio system
Laser Diode Properties
Emission duration: continuous
Laser Output*: Less than 44.6µW
* This output is the value measurement at a distance of 200mm from the
objective lens surface on the Optical Pick-up Block with 7mm aperture. Frequency response: 20 Hz  20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Tuner section
FM stereo, FM/AM superheterodyne tuner
Antenna:
FM lead antenna
AM loop antenna
FM tuner section:
Tuning range
Canadian model: 87.5  108.0 MHz (100 kHz step)
Other models: 87.5  108.0 MHz (50 kHz step)
Intermediate frequency: 10.7 MHz
AM tuner section:
Tuning range
Canadian model: 530  1,710 kHz (with 10 kHz tuning interval)
531  1,710 kHz (with 9 kHz tuning interval)
European and Russian models: 531  1,602 kHz (with 9 kHz tuning
interval)
Other models: 530  1,710 kHz (with 10 kHz tuning interval)
531  1,602 kHz (with 9 kHz tuning interval)
Intermediate frequency: 450 kHz
Speaker
Speaker system: Full Range, 12 cm dia., cone type
Nominal impedance: 6 ohms
Dimensions (w/h/d): Approx. 160 Ч 246 Ч 211 mm
Mass: Approx. 1.9 kg net per speaker
General
Power requirements:
Canadian model: 120 V AC, 60 Hz
European and Russian models: 230 V AC, 50/60 Hz
Australian model: 230  240 V AC, 50/60 Hz
Korean model: 220 V AC, 60 Hz
Argentine model: 220 V AC, 50/60 Hz
Mexican model: 127 V AC, 60 Hz
Other models: 120 V, 220 V or 230  240 V AC, 50/60 Hz,
adjustable with voltage selector
Power consumption:
Canadian model: 100 W
European model: 110 W
Other models: 110 W
Dimensions (w/h/d) (excl. speakers): Approx. 170 Ч 246 Ч 307.5 mm
Mass (excl. speakers): Approx. 4.0 kg
Supplied accessories: Remote Commander (1)/FM lead/AM loop antenna
(1)/R6 (size AA) batteries (2)/Speaker pads (8)
Design and specifications are subject to change without notice.
 Standby power consumption: 0.5 W
 Halogenated flame retardants are not used in the
certain printed wiring boards.
 Halogenated flame retardants are not used in cabinets.