Shopsmith TS-III ULTRA - Manual (Page 2)

2 INCRA Woodworking Tools & Precision Rules
SAFETY INSTRUCTIONS
Important safety instructions for using the
INCRA TS-III Ultra
■
Before using the INCRA TS-III Ultra, read
and follow all of the instructions and safety
information in this manual.
■
When using the INCRA TS-III Ultra in
conjunction with any other tool, first read and
follow all instructions and safety information in
that toolʼs ownerʼs manual.
■
Never let any part of the INCRA TS-III Ultra
interfere with another toolʼs safety guards or
other safety equipment.
■
Before using your INCRA TS-III Ultra, make
sure all mounting screws are tight and that the
black clamping knobs are securely tightened.
■
Always turn off the power and make
sure that the blade is fully stationary before
changing the setting on any part of the INCRA
TS-III Ultra.
■
Always keep both hands behind the fence
when moving the INCRA TS-III Ultra to a new
setting.
■
Before making a cut, always make sure
that the carriage clamp is fully engaged.
■
Use appropriate safety devices. Keep
hands clear of the saw blade! Always use a
push stick, rubber soled push block, or other
safety devices to keep your hands safely
away from the saw blade.
■
Never let the saw blade come into contact
with any part of the INCRA TS-III Ultra.
■
Always hold the Shopsmith table height
crank firmly as you loosen the table height
lock when making changes to your worktable
height.
■
Wear safety glasses, hearing protection,
and follow all normal shop safety practices.
System
Photo
Precision Racks Micro Adjust
1
2
5
6
7 10
9
8
11
12
13
14 15
16
4
4
3