Sony CH240 - Manual (Page 123)

Ot
her
s
Glossary
123
3) sysName=
Set the case of “mib-2.system.sysName.0” in the
position. The maximum length of
is 255 characters.
4) enaAuthTraps=
Set the case value of “mib-2.snmp.snmp
EnableAuthenTraps.0” in the position.
Type “1” (enable) or “2” (disable) in the
position.
5) community=,r,
,
Set the community attributes. describes the
setting identification number (1 to 8)
describes the community
name to be set, and describes
the IP address of the host you allow access (0.0.0.0
for any host).
Example: To allow reading by any host in the
“private” community and having the ID
number “2”.
community=2,r,private,0.0.0.0
6) trap=,,
Set the attributes to send traps to. describes
the setting identification number (1 to 8),
describes the community
name to send traps to, and
describes the IP address of the host to send traps to.
Example: To specify the destination of traps as the
public community and the ID number “1”.
trap=1,public,192.168.0.101
7) delcommunity=
This parameter is used to delete the previous
community setting. describes the community
setting identification number (1 to 8).
8) deltrap=
This parameter is used to delete the previous setting
of the host to send traps to. describes the trap
setting identification number (1 to 8).
When you have finished changing the SNMP setting
information using the above parameters 1) to 8), check
the changed settings using an inquiry command. If the
changed settings are OK, restart the SNMP using the
following CGI command.
SNMP restart command
GET, POST
Glossary
ActiveX control
A component program object that can be used with web
pages or other application programs. The technology for
creating ActiveX control is part of software developed
by Microsoft.
AES
Abbreviation for Advanced Encryption Standard. This is
the next-generation standard of encryption, adopted by
the U.S. government.
ARP commands
The commands for checking the entry of the IP address
and MAC address in a host computer, or for updating
them.
Bandwidth control
To limit the amount of transmitted data.
Bit rate
The rate at which data bits are transmitted.
CA (Certificate Authority)
A private authority that issues and controls digital
certificates to be used for authentication regarding
network access.
Capture
To send audio and video converted to digital data from
video devices to a computer.
Codec
Software/hardware for coding/decoding video and audio
data.
Common name
A URL to be typed in the browser when you access a
website employing SSL (Secure Sockets Layer)
protocol with the security function. Access is successful
after the URL of the website is verified as matching the
server’s common name.
Contrast
The difference in tone between the lightest and darkest
portions of the image.
Default gateway
Device that can be used to access another network.