Smeg DI912 - Manual (Page 15)

User instructions
50
CHANGING THE PROGRAM
To change the program in progress, simply open the door and select a
new program. When the door is closed the dishwasher will automatically
select the new program.
SELECTING THE WASH-ZONE OPTION (available in all programs
except the soak program)
Press button (10) in repetition to select the zone where you wish to
concentrate the washing action, in the following order:
1) right zone 65% - left zone 35% (right-hand light on);
2) right zone 35% - left zone 65% (left-hand light on);
3) both zones 50% (lights off).
EXTRA PROGRAMS
Button (6) gives access to five extra programs in addition to the ones
which can be selected directly using the program selector button.
This button must be pressed (the light comes on) after selection of the
"main" program (1, 2, 3, 4 or 5).
This function is retained in the memory, so the button has to be
pressed again (the light goes out) if the user wishes to execute one of
the 5 main programs at the next cycle.