SUPER MICRO Computer 6015B-Ni - Manual (Page 108)

C-4
S UPER S ERVER 6015B-Ni User's Manual
b. Specify a name for the RAID 0 set and press the key or the key
to go to the next fi eld. (You can use the key to select the previous menu.)
c. When RAID Level item is highlighted, press the , keys
to select RAID 0 (Stripe) and hit .
d. When the Disks item is highlighted, press to select the HDD to confi gure
as RAID. The following pop-up screen displays:
e. Use the and keys to highlight a drive and press
to select it. A triangle appears to confi rm the selection of the drive.
f. Use the , keys to select the stripe size, ranged from
4 KB to 128 KB for the RAID 0 array, and hit . (*Note: For a server, please
use a lower stripe size, and for a multimedia system, use a higher stripe size. The
default stripe size is 128 KB.)
g. Press when the Create Volume item is highlighted. A warning message
displays.
h. When asked "Are you sure you want to create this volume (Y/N), press "Y" to
create the RAID volume, or type "N" to go back to the Create Volume menu.
Creating a RAID 0 Volume
a. Select "Create RAID Volume" from the main menu and press the key.
The following screen will appear: