Samson MDR624 - Manual (Page 19)

MDR624 Specifications
Mono input channels
Microphone input electronically balanced, discrete input configuration
Frequency response 10Hz to 45kHz, +0/- 3dB
Distortion (THD&N) 0.05% at +4dBu, 1kHz
Gain range 5dB to 60dB(MIC)
SNR (Signal to Noise Ratio) 110dB
Line input electronically balanced
Frequency response 10Hz to 45kHz, +0/ -3dB
Distortion (THD&N) 0.05% at +4dBu, 1kHz
Sensitivity range -40dBu to -10dBu
Stereo input channels
Line input balanced
Frequency response 10Hz to 55kHz,+0/-3dB
Distortion (THD&N) 0.05% at +4dBu, 1kHz
Impedances
Microphone input 3.6Kohm
All other inputs 10Kohm or greater
Tape out 1Kohm
All other outputs 120ohm
Equalization
Hi shelving +/- 15dB @12kHz
Mid bell +/- 15dB @2.5kHz
Low shelving +/- 15dB @80Hz
Main Mix Section
Noise(Bus noise) Fader 0 dB, channels muted:100.0dBr (ref.:+4dBu)
Fader 0dB, all input channels assigned and set to UNITY gain:
-90dBr(ref.: 4dBu)
Max output +22dBu balanced
AUX Return gain range 0 to +15dB
AUX Send max out +22dBu
Power supply (AC/AC Adaptor)
Main Voltage USA/Canada 95-120V~,60Hz
Europe 210-230V~,50Hz
U.K./Australia 240V~,50Hz
Power Consumption
10Watts
Physical
Dimension (W, D, H) 187mm 257mm 36/50mm
Net weight 3.7 lb. (1.7 kg) Without Adaptor
17