Sharp VL-Z400H-T User Manual

Page 69

Advanced Features

Locking

Select “LOCK MODE” in step 4 in
“Selecting” on the previous page.

Aim the lens at a white object.

• Adjust the distance of the object so

that the entire screen is white.

Press the centre of the Operation
button to set the white balance lock.

• “LOCK MODE” will change to

“LOCK” after pressing the centre of
the Operation button.

• “LOCK” flashes during the locking

procedure, and stops flashing after
locking the white balance.

Note:

• If you move the camcorder while

“LOCK” is flashing, “LOCK” may not
stop flashing. If this occurs, repeat
step 3.

Press the DISPLAY/MODE SET
button to turn off the MANUAL SET
screen.

To return to Auto White Balance
mode

Press j in step 4 in “Selecting” on the
previous page or step 3 in “Locking” to
display “AUTO”.

To return to Full Auto mode

Set the camcorder to Full Auto mode (see
page 61).

Note:
• White Balance setting cannot be used

when a scene setting is selected.

White paper or white cloth

VL-Z400H-054-063

04.3.23, 8:43 AM