Sharp AR-203E - Manual (Page 41)

39
4
Using the SHARP TWAIN
1
Place the original(s) you wish to scan on the document
glass/SPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT"
(p.15).
2
After starting Sharpdesk, click the "File" menu
and select "Select Scanner".
3
Select "SHARP MFP TWAIN S", and click
the "Select" button.
4
Select "Acquire Image"
from the "File" menu,
or click the "Acquire"
button (
) .
5
Set the configuration for scanning (refer to the online manual
and help file), and click the "Scan" button.
Scan is started.
If you use more than one scanning device, select the scanner
you want to use through the application. The method for
accessing the "Select Scanner" option, depends upon the
application. For more information, see the online manual or the
help file of your application.
WIA-SHARP AR-xxxx