Sonic Blue 4500 - Manual (Page 11)

5
C
o
n
n
e
ct
io
n
s
G
e
tt
in
g
S
ta
rt
e
d
S
e
tu
p
B
a
si
c
O
p
e
ra
ti
o
n
s
A
d
v
a
n
ce
d
F
e
a
tu
re
s
H
e
lp
:: Rear Panel Overview
1 IN FROM ANT Connect an antenna, cable TV coaxial cable, or cable box with coaxial cable.
2 OUT TO TV Connect to a television VHF/UHF jack with coaxial cable.
3 S-VIDEO IN Connect to a cable box or satellite receiver that has S-Video Out. The Audio/Video IN 2 connectors must be
used with S-Video to receive sound.
4 S-VIDEO OUT Connect to a television, monitor or A/V receiver that has S-Video In.
5 VIDEO/AUDIO IN 1/IN 2 Connect to the Audio/Video outputs of a cable box or satellite receiver using standard audio/
video cables.
6VIDEO/AUDIO OUT 1/OUT 2 Connect to the Audio/Video inputs of a television, monitor or A/V receiver using stan-
dard audio/video cables.
7 ETHERNET (10/100BaseT) Connect to a broadband home network, including a router, hub or switch.
8 VGA Connect to a television or monitor equipped with a VGA input connector.
9 DIGITAL AUDIO OUT (OPTICAL) Connect to an audio/video receiver equipped with an optical input.
10 IR BLASTER Connect and affix the IR emitter over the infrared detector on a cable box or satellite receiver. This allows
ReplayTV to change the channels on these devices.
11 SERIAL CONTROL Connect to a satellite receiver that has a Serial port. This allows ReplayTV to change the channels on
the satellite receiver. The IR Blaster is not needed if the satellite receiver has Serial Out.
12 TEL LINE Connect directly to a wall jack.
13 POWER CORD Connect to an electrical outlet.