Sears 247.88853 - Manual (Page 27)

27
777S32066
DANGER
AVOID INJURY FROM ROTATING AUGER - KEEP HANDS, FEET
AND CLOTHING AWAY.
KEEP AWAY FROM ROTATING IMPELLER
AND AUGER. CONTACT WITH IMPELLER OR
AUGER CAN AMPUTATE HANDS AND FEET.
USE CLEAN-OUT TOOL TO UNCLOG
DISCHARGE CHUTE.
DISENGAGE CLUTCH LEVERS, STOP ENGINE,
AND REMAIN BEHIND HANDLES UNTIL ALL
MOVING PARTS HAVE STOPPED BEFORE
UNCLOGGING OR SERVICING MACHINE.
TO AVOID THROWN OBJECTS INJURIES,
NEVER DIRECT DISCHARGE AT BYSTANDERS.
USE EXTRA CAUTION WHEN OPERATING ON
GRAVEL SURFACES.
READ OPERATOR'S MANUAL.
1.
2.
3.
4.
5.
DANGER
CLEAN-OUT TOOL
777S32065
DANGER
NEVER PUT HAND IN CHUTE. CONTACT WITH
ROTATING PARTS CAN AMPUTATE FINGERS
AND HANDS. USE CLEAN-OUT TOOL TO
UNCLOG DISCHARGE CHUTE.
DO NOT UNCLOG DISCHARGE CHUTE WHILE
ENGINE IS RUNNING.
SHUT OFF ENGINE AND REMAIN BEHIND
HANDLES UNTIL ALL MOVING PARTS HAVE
STOPPED BEFORE UNCLOGGING.
(CENTER MODEL PLATE
WITH TOP OF FRAME COVER)
777D00334
777I20329
777I20330
AUGER
CONTROL
TRACTION
CONTROL
STEER
P O W E R E D S T E E R I N G
9.0/28
ELECTRIC START
LEFT TURN CONTROL
AUGER CONTROL
CHUTE DIRECTIONAL CONTROL
C L O C K W I S E T O
DISCHARGE LEFT COUNTER CLOCKWISE TO DISCHARGE RIGHT
CHUTE
TILT
CONTROL
F
R
6
5
4
3
2
1
R1
R2
TRACTION CONTROL
RIGHT TURN CONTROL
F O R S T E E R A B L E O P E R A T I O N : SQUEEZE LEFT TURN CONTROL TO STEER
SNOWTHROWER TO THE LEFT. SQUEEZE RIGHT
TURN CONTROL TO STEER SNOWTHROWER
TO THE RIGHT.
• READ OPERATORS MANUAL BEFORE STARTING. • INSERT IGNITION KEY INTO SLOT. MAKE SURE IT SNAPS INTO PLACE.
DO NOT TURN KEY.
• RECOIL STARTER: PUSH PRIMER 2 OR 3 TIMES. ELECTRIC STARTER: DO NOT PRIME. • PUSH START BUTTON OR PULL ROPE HANDLE TO START ENGINE. • SELECT SPEED REQUIRED. SQUEEZE RIGHT TRACTION CONTROL LEVER TO MOVE.
RELEASE TO STOP.
ALWAYS RELEASE TRACTION CONTROL
LEVER BEFORE CHANGING SPEEDS.
• FOR SNOWTHROWING, ENGAGE LEFT AUGER CONTROL LEVER BEFORE TRACTION
CONTROL LEVER.
•
IMPORTANT: THIS MACHINE IS EQUIPPED
WITH AN AUGER CONTROL LOCK.
TO STOP AUGER, BOTH AUGER CONTROL
AND TRACTION CONTROL LEVERS MUST
BE RELEASED.
TO STOP ENGINE, PULL OUT IGNITION KEY.
LEFT TURN CONTROL
AUGER CONTROL
CHUTE DIRECTIONAL CONTROL C L O C K W I S E T O
DISCHARGE LEFT COUNTER CLOCKWISE
TO DISCHARGE RIGHT
TRACTION CONTROL
RIGHT TURN CONTROL
F O R S T E E R A B L E O P E R A T I O N :
SQUEEZE LEFT TURN CONTROL TO STEER
SNOWTHROWER TO THE LEFT. SQUEEZE RIGHT
TURN CONTROL TO STEER SNOWTHROWER
TO THE RIGHT.
• READ OPERATORS MANUAL BEFORE STARTING. • INSERT IGNITION KEY INTO SLOT. MAKE SURE IT SNAPS INTO PLACE.
DO NOT TURN KEY. • RECOIL STARTER: PUSH PRIMER 2 OR 3 TIMES. ELECTRIC STARTER: DO NOT PRIME. • PUSH START BUTTON OR PULL ROPE HANDLE TO START ENGINE. • SELECT SPEED REQUIRED. SQUEEZE RIGHT T R A C T I O N C O N T R O L L E V E R T O M O V E .
RELEASE TO STOP.
ALWAYS RELEASE TRACTION CONTROL
LEVER BEFORE CHANGING SPEEDS.
• FOR SNOWTHROWING, ENGAGE LEFT AUGER C O N T R O L L E V E R B E F O R E T R A C T I O N
CONTROL LEVER.
•
IMPORTANT: THIS MACHINE IS EQUIPPED
WITH AN AUGER CONTROL LOCK.
TO STOP AUGER, BOTH AUGER CONTROL
AND TRACTION CONTROL LEVERS MUST
BE RELEASED.
TO STOP ENGINE, PULL OUT IGNITION KEY.
CHUTE TILT CONTROL F
R
6 5 4 3 2 1
R1
R2
777I20729 777I20728 777I20727
777D05309
(MODEL PLATE CENTERED
WITH TOP OF FRAME COVER)
9.0 HP
E L E C T R I C S T A R T
R
R E A D I N S T R U C T I O N S B E F O R E S T A R T I N G
LABELS LIST & LOCATION