SpectraLink 8668 - Manual (Page 70)

56 Inter-Tel ® Model 8664/8665/8668 User Guide
MOVING ON
I
NTRODUCTION
Now that you’ve mastered the basics, it’s time to move on to the advanced features. In
this section, you’ll learn how to set preferences for your endpoint, program buttons,
use directories, access your voice mailbox remotely, and perform various other func-
tions.
S
ETTING
E
NDPOINT
P
REFERENCES
Your endpoint is automatically set to specific defaults. You can, however, configure
many of these settings at any time. Customizable features on your endpoint include
changing the ring type, eliminating background noise with the high noise feature,
enabling and disabling the Push-to-Talk (PTT) feature (Model 8665 only), and select-
ing a PTT channel (Model 8665 only). An asterisk (*) indicates that an option is
selected.
When the endpoint is in idle mode, press
to display user options. To navigate
through the menu, use the buttons and softkeys listed in the following table.
In addition to the endpoint configuration options mentioned above, you can view cer-
tain administrator settings from this menu such as IP Address, etc. Only your admin-
istrator can change these options.
BUTTON ACTION
Up/Down buttons Display previous/next menu item
Select button Selects the menu item or option
OK softkey Selects the menu item or option
Save softkey Saves the entry
Bksp softkey Backspaces to allow editing of entry
Cncl softkey Cancels edit and returns to previous menu level
Up softkey Returns to previous menu level
Exit softkey Exits the menu (at the top level)
End Call key Exits to idle state (from any level)
FCN