Sharp CP-G15000 User Manual

Page 14

06/1/5

CD-G15000_E2.fm

TINSEA128AWZZ

Preparation for Use

CP-G15000

CD-G15000

System connections (continued)

Connecting the subwoofer

Use the subwoofer cable to connect the SUBWOOFER PRE-OUT
jack on the main unit and the SUBWOOFER IN jack on the active
subwoofer.

AC power connection

After checking all the connections have been made correctly, plug
the AC power cord of this unit into the AC outlet. If you plug in the
unit first, the unit will enter the demonstration mode.

Notes:

Make sure to unplug the AC power cord of the main unit before
making any connections.

75 OHMS

GND AM

ANTENNA

VIDEO

OUT

RIGHT

RATED SPEAKER IMPEDANCE : 16 OHMS MIN.

LEFT

REAR SPEAKERS

Main unit

Subwoofer cable

Active subwoofer

To subwoofer
output jack

To subwoofer
input jack

The unit will start the tape initialization when plugged in to the AC
outlet. During this process, an initializing sound will be heard and
the unit cannot be turned on. Wait until the process is finished.

Unplug the AC power cord from the AC outlet if the unit will not be
in use for a prolonged period of time.