Sennheiser evolution wireless series EM 100 - Manual (Page 52)

Specifications
51
Specifications
RF characteristics
Modulation wideband FM
Frequency ranges 516–558, 566–608, 626–668, 734–776, 780–822,
823–865 MHz (A–E, G, see page 4)
Receiving frequencies 1,680 receiving frequencies,
tuneable in steps of 25 kHz
20 frequency banks, each with up to 12 factory-
preset channels, intermodulation-free
1 frequency bank with up to 12 user programmable
channels
Switching bandwidth 42 MHz
Nominal/peak deviation
±24 kHz/±48 kHz
Receiver principle true diversity
Sensitivity (with HDX , peak deviation)
< 2 μV for 52 dBA
rms S/N
Adjacent channel rejection typ.
≥ 65 dB
Intermodulation attenuation typ.
≥ 65 dB
Blocking
≥ 70 dB
Squelch Off, Low: 5 dB
μV, Middle: 15 dBμV, High: 25 dBμV
Pilot tone squelch can be switched off
Antenna inputs 2 BNC sockets
AF characteristics
Compander system Sennheiser HDX
EQ presets
Preset 1: “ Flat ”
Preset 2: “ Low Cut ” –3 dB at 180 Hz
Preset 3: “ Low Cut/High boost ” –3 dB at 180 Hz
+6 dB at 10 kHz
Preset 4: “ High Boost ” +6 dB at 10 kHz