Front panel features, Chapter 1, Signal processing – Sunfire IV User Manual

Page 10: Ir receiver window, Display, Mode buttons, Rotation, User's manual, Theater grand, Sunfire

User's Manual

LEVEL

+10

DIRECT

AM/FM

DOLBY

DIGITAL

SOURCE

PRO LOGIC IIx

DTS

SIGNAL PROCESSING

SIDE-AXIS

HOLOGRAPHIC
IMAGE

ZONE TWO
ADJUST

ZONE TWO
POWER

POWER

MANUAL

TUNING

DOWN

MODE

SELECT

DOWN

ROTATION

ZONE

TWO

DOWN

BASS

TREBLE

HOLOGRAPHIC
IMAGE

PANEL
DIM

MUTE

MANUAL INPUT SELECTOR

FULL AUTOMATIC

OPERATION

TUNER CONTROLS

TONE CONTROLS

Theater Grand

Sonic Holography Nine point One Channels Surround Sound Processor

Sunfire

Theater Grand IV

CHAPTER 1

Front Panel Features

1. Signal Processing

DOLBY DIGITAL

This light is on when a Dolby
Digital signal is being decoded.

DTS

This light is on when a DTS
signal is being decoded.

DOLBY PRO LOGIC IIx

This light is on when the Dolby
Pro Logic IIx mode, or Dolby
Pro Logic II mode is engaged.

DIGITAL SOURCE

This light is on when a Digital
signal is being decoded.

ZONE TWO POWER

This light is on when Zone 2 is
turned on.

ZONE TWO ADJUST

This light is on when Zone 2 is
being adjusted.

HOLOGRAPHIC IMAGE

This light is on when the HOLO-
GRAPHIC IMAGE "circuit" is
engaged. (This is actually
modeled in DSP).

SIDE AXIS

This light is on when the side-
axis outputs are enabled.

2. IR Receiver Window

This window should be clean
and free from ob struc tion for the
remote control to work correctly.

3. Display

This soothing blue display shows
which input is se lect ed, the tuner
frequency, volume level, and other
useful features.

4. Mode Buttons

MODE UP/DOWN

These buttons allow you to step
up or down through the various
sound playback modes.

ZONE TWO

Note: If Zone 2 has not been
enabled (see page 36) this but-
ton has no effect.

Any changes you make after

pressing this, will affect Zone 2
and not the Main Zone. For ex-
ample, press this and POWER
to turn on Zone 2, then adjust
the Volume and select an input.
Press ZONE 2 again to revert
back to Main Zone operation.
It will also revert back after a
short period of no activity.

TREBLE/BASS SELECT

Use these buttons to select
either the Treble or Bass for ad-
justment using the UP/DOWN
TONE controls (11).

HOLOGRAPHIC IMAGE

Engage this "circuit" to add a
three di men sion al effect, es pe -
cial ly to stereo listening.

PANEL DIM

The front panel lights have four
levels: bright, me di um, low and
off (low intensity display with
amber LEDs off).

MUTE

This turns off the sound. Press
it again, or adjust the volume
control to return to the pre vi ous
volume level.

5. Rotation

This light pulses when the front
panel volume LEVEL or INPUT
SELECTOR are being rotated, or
when you are using the remote
control.