Sound Performance Lab Model 2601 - Manual (Page 24)

24
Transducer
Input
Speaker Input 1/4" Jack connection
Impedance 8 Ohms
Max. Input Load 100 W RMS, 200 W Peak
Outputs
Speaker Thru 1/4" Jack connection
Pre Simulation Out 1/4" Jack connection
Impedance ca. 1 kOhm
Mic Level Output XLR, electronically balanced
Impedance unbalanced ca. 600 Ohms
Impedance balanced ca. 1,2 kOhms
Max. Output Level +6 dBu
Signal to Noise Ratio -100 dBu (A weighted)
Line Output 1 XLR, electronically balanced
Impedance unbalanced ca. 600 Ohms
Impedance balanced ca. 1,2 kOhms
Max. Output Level +21,5 dBu
Signal to Noise Ratio -94 dBu (A weighted)
Line Output 2 XLR and 1/4" TRS connection, electronically balanced
Impedance unbalanced ca. 600 Ohms
Impedance balanced ca. 1,2 kOhms
Max. Output Level +21,5 dBu
Signal to Noise Ratio -94 dBu (A weighted)
Power Supply
Selectable Line Voltages 115 V AC, 60 Hz
230 V AC, 50 Hz
Power Consumption 5,2 VA
Fuses 110 – 120 V AC: 400 mA slow blow
220 – 240 V AC: 200 mA slow blow
Power Connector Standard 3-prong IEC connector
Dimensions & Weight
Height x Width x Depth 88,2 mm x 482,6 mm x 270 mm
ca. 3,4" x 19" x 10,6"
Weight 4,8 kg/10,58 lbs
Specifi cations