Silvercrest KH 2450 - Manual (Page 38)

40
10
Place the multi-function slider
h
at » START«; the voice recorder now
functions as the microphone for the dictation/voice recognition software
on the PC. In the display
q
is indicated:
VOL± ESC
PC Microphone
Record
Mode
In the meanwhile you can adjust the record sound volume level between the values
of 000 (muted) and 250 (maximum volume).
To increase the record sound volume: Press the function button B
e
: With each
press of the button you raise the record sound volume by a step. For a faster raising
of the record sound volume you can also hold down the function button B
e
.
To reduce the record sound volume: Press the function button C
r
: With each press
of the button you reduce the record sound volume by a step. For a faster reduction of
the record sound volume you can also hold down the unction button C
r
.
The currently adjusted record volume level is indicated for a few seconds in the display
q
.
To terminate PC microphone operation: Select, by pressing the function button A
w
,
»ESC«; In the display
q
the Menu is once again shown. To return to the start
screen: select, by pressing the function button A
w
twice in succession, »ESC«.
8.8 Switch-off options
From the factory, this voice recorder is set so that after 10 minutes, and without a
button being pressed, it switches itself off automatically. Additionally, it can be set
so that …
Ú it automatically switches itself off after 30 minutes without a button being
pressed.
Ú it can only be manually switched off by pressing the button »ON/OFF«
a
.
To carry out the settings:
Bedienungsanleitung KH 2450 EN.indd 40 23.12.2008 23:09:44