Adding/deleting the area code, Dialing numbers from a caller id record, Deleting caller id records – Sprint Nextel 2.4 GHz Digital Spread Spectrum Dual Keypad Cordless Phone with Caller ID/Call Waiting User Manual
Page 20
20
Caller ID Operation
ADDING/DELETING THE
AREA CODE
When the area code of the received call is
the same as the one you stored (see “Storing
Your Area Code” on Page 13), the caller ID
record does not show the area code. If it is
different, the record shows the area code.
However, you can add or delete the area
code on the display. When the record is on
the display, press
3
to add or delete the area
code. Pressing
3
again deletes or adds the
area code.
DIALING NUMBERS FROM A
CALLER ID RECORD
To dial a local number stored in a Caller ID
record, recall the record, then press
TALK
. If
it is a long distance call, press
1
(
1
appears
before the displayed number) before you
press
TALK
. If you want to add or delete the
area code, press
3
before you press
TALK
.
Note: If a Caller ID record does not contain a
phone number (if it was blocked by the caller,
for example) you cannot dial from that
record.
STORING A CALLER ID
RECORD TO MEMORY
Follow these steps to store the name and
number from a Caller ID record into a memo-
ry location.
1. Press
CID
then
VOL/CID
8
8
8
8
or
9
9
9
9
to
recall the record you want to store.
If you want to add or delete the area
code, press
3
.
2. Press
MEM
.
Select
Location
appears.
3. Choose a memory location (
01
–
20
) by
pressing a number or by repeatedly
pressing
VOL/CID
8
8
8
8
or
9
9
9
9
, then press-
ing
SELECT/CHANNEL
.
If the selected location is empty, the
phone beeps to confirm that it stored the
number, then the Caller ID record
appears.
If a record exists in the selected loca-
tion,
Replace
Memory?
appears,
prompting you to confirm the replace-
ment. Press
VOL/CID
8
8
8
8
or
9#
9#
9#
9#
to
####
move
the cursor to
Yes
or
No
, then press
SELECT/CHANNEL
. The phone beeps to
confirm the replacement.
DELETING CALLER ID
RECORDS
You can delete Caller ID records individually
or all at once.
Follow these steps to delete a single Caller
ID record.
1. Press
CID
then
VOL/CID
8
8
8
8
or
9
9
9
9
to
recall the record you want to delete.
2. Press
INTCM/DEL
.
Delete
Message?
and
Yes/No
appear with the cursor
pointing to
Yes
.
Unknown
Name
or
Unknown
Number
The caller is not within a
Caller ID service area.
Incomplete
Data
Appears if there was an
error during the transmis-
sion of Caller ID informa-
tion. Occasional errors are
normal. If the phone fre-
quently displays
Incom-
plete
Data
, contact
your local telephone com-
pany or RadioShack store.
Display
Description
43-5522.fm Page 20 Tuesday, September 12, 2000 3:12 PM