Sharp AR-207 - Manual (Page 14)

12
GETTING ST
AR
TED
GETTING ST
AR
TED
Loading cop
y paper
LOADING COPY PAPER
8 To set the selected paper size, press the PAPER SIZE
ENTER key.
● The selected paper feed location indicator will blink and the
corresponding paper size (which is currently set) indicator will light
up steadily. All other indicators will go out.
For paper size setting, ensure that the COPY mode
has been selected. However, if copying, printing or
facsimile printing is being performed, paper size setting
cannot be made even in the COPY mode. See Note
on page 63.
9 Use the TRAY SELECT key to select the paper tray of
which the paper size has been changed.
● Each time the TRAY SELECT key is pressed, a paper tray will be
indicated with a blinking paper feed location indicator.
10 Use the ORIGINAL SIZE ENTER key to select the paper
size which is set.
● Each time the ORIGINAL SIZE ENTER key is pressed, a paper size
will be indicated with a paper size indicator.
11 Press the START key and then the PAPER SIZE ENTER
key.
● To change the paper size setting of another tray, repeat steps 9 to 10
after pressing the START key.