Soundstream Technologies 604 - Manual (Page 5)

Top View Front View
8
Bottom View
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
KEY TO
Power LEO Indicates amplifier power, either in High Power or Auto
Subsonic Hawkins Bass Control Switch “SUB SONIC” to engage
the Sub Sonic filter at 13 Hz. ‘“Hawkins Bass Control” to engage the high
pass filter 45 Hz with variable boost (Q) for optimum bass for any chan-
nel in Low Pass.
XOVER Switch (Channels Select “L.P.” for use with the internal low
pass filter, “IN” for use with the internal high pass filter, or “OUT” for use
with external crossover.
Channels INPUT SELECT Selectable inputs from internal (from
channels or external (from channels local RCA inputs).
XOVER Switch (Channels Select “L.P.” for use with the internal low
pass filter, for use with the internal high pass filter, or “OUT” for use
with external crossover.
Inputs Right and left channel RCA inputs for channels
Input LEVEL Channels independent left and right input level control.
High Pass Control Adjustment (Channels crossover frequency
control for the internal high pass filter.
Speaker Connection Terminal Speaker connections for Ch’s
Inputs Right and left channel RCA inputs for channels
Input LEVEL Channels independent left and right input level control.
High Pass Control Adjustment (Channels crossover frequency
control for the internal high pass filter.
Low Pass Control Adjustment Crossover frequency control for the
internal low pass filter. Applies to any channel with the low pass filter
engaged.
Hawkins Bass Control “Boost” Adjustment Varies from 0 to of
boost when the Hawkins Bass Control is engaged. Note: Applies to any
channel with the low pass filter engaged.
LINE OUTPUTS Full range outputs to external amplifier. Note: Signal is
driven from channel inputs.
Speaker Connection Terminal Speaker connections for Ch’s
REMOTE Remote turn-on input from the head unit. Accepts
GND Main ground connection. Bolt to a clean chassis point in the
vehicle.
- Connected to a fuse or circuit breaker, then to the battery’s positive
terminal
Main Fuse Main power supply fuses.
Stereo/Mono Switch (Channels Select “MONO” for bridged mono
output (use right RCA input only). Select “STEREO” for stereo output.
Stereo/Mono Switch (Channels Select “MONO” for bridged mono
output (use right RCA input only). Select “STEREO” for stereo output.