Siemens CX70 - Manual (Page 8)

©
Siem
ens AG
2003, \\D
ellse
rv
er\users\admin\Ul
ysses Refres
h\E2\S_
ULY
R_
Startup.fm
7 Getting started
VAR Langua
ge: en; V
A
R issue
date: 040604
right page (7) of Ulysses_Refresh SUG en2 short, A31008-H7103-M7-1-RC19 (30.11.2004, 12:26)
Getting started
Inserting the SIM card/
battery
The service provider supplies you
with a SIM card on which all the
important data for your line is
stored. If the SIM card has been
delivered in credit-card size, snap the
smaller segment out and remove
any rough edges.
Press the grooved area
1
, then push
cover towards the front in the direc-
tion indicated by the arrow
2
.
• Place the SIM card in front of the
slot with the contact surface fac-
ing downwards. Then press the SIM
card slightly to push it in
3
(ensure that the chamfered corner
is in the correct position).
• Insert the battery sideways into
the phone
4
, then press it down-
wards
5
until it engages.
• To remove, press the retaining tab
on the side of the battery, then lift
the battery out.
• Place the cover in position and
push it towards the front
6
until
it latches into place.
Additional information
Please switch off your phone before
removing the battery!
Only 3 V SIM cards are supported. Please
contact your service provider if you have an
older card.
1
2
3
4
5
6