Sanyo CLT-E32 - Manual (Page 76)

[ E 7 4 ] E x p a n d i n g y o u r p h o n e
EXPANDING YOUR PHONE
Call Transfer Feature
1) During a call, press hold/transf/int’com.
2) Select a handset to transfer the call within 10 seconds.
(Refer to step 2 in the intercom section on page E73).
The call will automatically be placed on hold, and an
intercom tone sounds.
To cancel the transfer, press talk/flash or speaker on the
initiating handset.
3) On the receiving handset, to answer the page, press talk/flash or hold/transf/int’com.
If you turn Automatic Talk on, pick up the handset from the cradle. If Anykey Answer is
On, press any number key,
* /tone/ , or #/ . The intercom mode is activated, but the
caller is still on hold.
4) To accept the transfer and talk to the outside caller, press talk/flash on the receiving
handset.
Replacing the Base
If the base unit is replaced with a different base from the same series of cordless models,
you must clear the handset (s) and base identification numbers. To do this, select "System
Reset" from handsets display menu option list (see page E34 for guidance).
* Q N F V Q V T C P U H G T
* C P F U G V
* C P F U G V
UP383BA_0.book Page 74 Thursday, May 26, 2005 10:48 AM