Sharp XL-HP707 - Manual (Page 14)

14
XL-HP707
Ba
sic Ope
ration
General control
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
! Illumination light control
When the power is turned on, the entire display and ring around the
volume control light up. To turn on/off the light, hold down the
CLEAR/DIMMER button on the remote control for more than 2 sec-
onds.
! Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned counterclockwise, the volume will
decrease.
Remote control operation:
Press the VOLUME (+ or -) button to increase or decrease the volume.
! X-Bass control
When the power is first turned on, the unit will enter the extra bass
mode which emphasizes the bass frequencies, and "X-BASS" will
appear. To cancel the extra bass mode, press the X-BASS/DEMO
(X-BASS) button.
! Equalizer
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeat-
edly until the desired sound mode appears.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
30 MAXIMUM 0 .....
ROCK
FLAT
CLASSIC
The sound is not modified.
Bass and treble are emphasized.
POPS Bass and treble are slightly emphasized.
JAZZ Treble is slightly emphasized.
Treble is cut a little.
VOCAL Vocals (midrange tones) are emphasized.