SPX Cooling Technologies Cooling Tower W400 - Manual (Page 2)

Factory Fabricated, Field Erected Minimizes
cost impact of jobsite labor. Assures accurate parts
fabrication in conformance with design, and efficient
erection according to a predictable schedule.
Cellular Permits maximum operator control under
varying conditions of load and ambient weather.
Variety of components and structural possibilities
permits optimization to meet the required thermal
performance conditions.
Heavy Duty Construction All wood is pressure
treated after fabrication. All fabricated steel
components are hot dip galvanized or stainless steel.
Extensive use of inert plastics for structural and non
structural components. Designed for heavy industrial
use with long service life.
Wood Structure Designed in accordance with the
National Design Specification for Wood Construction
(NDS).
Counterflow Design Allows maximum thermal
performance capability per unit of plan area. Minimizes
pump head requirements.
FRP Casing Inert, corrugated fiberglass casing
provides a long lasting pleasing appearance.
PVC Film Type Fill Maximum thermal performance
per cubic foot of fill. Corrugated construction provides
years of reliable service. Immune to corrosion and
decay.
Induced Draft Locates fan and mechanical
equipment in warm airstream to simplify winter
operation. Minimizes the effects on performance by
exhaust air recirculation.
/ Marley Class W400 Cooling Tower /