Sony MULTI CHANNEL AV RECEIVER STR-DG710 - Manual (Page 65)

65 GB
O
ther Op
erati
ons
Notes
• You cannot reassign more than one digital audio
input to the same input.
• You cannot use the digital audio input as the
original input when it has been reassigned to
another input.
• When you assign the digital audio input, the
INPUT MODE setting may change automatically
(page 60).
Naming inputs
You can enter a name of up to 8 characters for
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP MENU.
“1-LEVEL” appears on the display.
3
Press V/v repeatedly to select
“5-AUDIO” or “6-VIDEO”.
4
Press or b to enter the
menu.
5
Press V/v to select “NAME IN”.
6
Press or b to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
“To create an index name” (page 58).