Socket Mobile Cordless Hand Scanner - Manual (Page 27)

3 | Setup for Palm
This chapter explains how to install and use the Cordless Hand Scanner
(CHS) with a Bluetooth enabled device running Palm OS 5.2 or later.
Setup Summary
STEP 1: Install batteries and attach tether.
STEP 2: Charge the scanner.
STEP 3: Uninstall other scanning software.
STEP 4: Install the software.
STEP 5: Connect scanner to PDA via Bluetooth.
STEP 6: Scan data into your application.
OPTIONAL:
• Configure scan settings.
• Select symbologies.
• Test bar codes.
For help using SocketScan, tap on the button on the top of
any screen.
STEP 1: Install Batteries and Attach Tether
1. Use a coin or screwdriver to unlock and remove the battery cover. Turn
the lock underneath the scanner to a horizontal position. Remove the
casing.
2. Install the batteries in opposite directions, as indicated by the positive
symbols.
WARNING: Do not install the batteries incorrectly.
Damage may result.
3. If desired, attach the tether. Wrap the string loop around the inside part
of the lock.
4. Replace the battery cover and lock it into place.
5. If desired, attach the tether to a lanyard or belt.
CHAPTER 3: SETUP FOR PALM 27