SPT SF-613 - Manual (Page 5)

4
D. SELECTION OF FUNCTIONS
1. ON/OFF: Turns unit ON or OFF
Press once to turn ON. Following indicator lights will illuminate: POWER,
IONIZER, and SPEED. Unit operates in default High fan speed. LCD
panel will display rotating fan at High speed.
Press again to turn OFF.
IONIZER turns on automatically when unit is powered on.
2. FLOW: Horizontal swing of vertical louvers.
Press once to engage auto swing of louvers. FLOW indicator light will
illuminate and LCD panel will display auto swing indicator.
Press again for fixed air direction.
To directing vertical airflow, adjust the horizontal louvers manually.
3. Speed: Selects fan speed.
Press to select desired fan speed: High
– Medium – Low, in turn. LCD
panel will display the corresponding air speed.
4. Sleep: Unit operates according to preset computer program, alternating
between different fan speeds.
Press to engage in Sleep Mode. SLEEP indicator will illuminate and LCD
panel displays the sleep (moon) indicator.
To return to regular fan mode, press either SLEEP or SPEED button.
5. Cool: For cool air / humidify function.
Press once to start the evaporative cooling function. COOL indicator light
will illuminate and LCD panel displays the cool (snowflake) indicator.
Press again to stop function and operate in regular fan mode.
Make sure water is added before turning on this function. Unit cycles the
water to blow cool, humidified air.
Add ice to the water tank for added cooling.
6. Timer: Sets timer-off in increment of 0.5 hours.
Timer can be set between 0.5 to 7.5 hours.
TIMER indicator will illuminate and LCD panel will display the set time.
To remove timer and operate unit continuously, press button repeatedly
until indicator light and display goes off.
7. Oxygen Bar with Negative ion.
Fan releases negative ions into the air.
Operates automatically when unit is turned on.
NOTE: Water must be added to the water tank before using the COOL function.
www.sylvane.com 1-800-934-9194