SUPER MICRO Computer X7DVL-3 - Manual (Page 60)

4-4
X7DVL-3/X7DVL-i User's Manual
XIDE Channel 0 Master/Slave, IDE Channel 1 Master/Slave, SATA
Port2 and SATA Port3
These settings allow the user to set the parameters of IDE Channel 0 Master/
Slave, IDE Channel 1 Master/Slave, IDE Channel 2 Master, IDE Channel 3 Master
slots. Hit to activate the following sub-menu screen for detailed options
of these items. Set the correct confi gurations accordingly. The items included in
the sub-menu are:
Type
This option allows the user to select the type of IDE hard drive. Select Auto to
allow the BIOS to automatically confi gure the parameters of the HDD installed at
the connection. Enter a number between 1 to 39 to select a predetermined HDD
type. Select User to allow the user to enter the parameters of the HDD installed.
Select CDROM if a CDROM drive is installed. Select ATAPI if a removable disk
drive is installed.