Woodstock SHOP FOX D3736 - Manual (Page 10)

Model D3736 Palm Finishing Sander
-8-
MAINTENANCE
Your Model D3736 Palm Finishing Sander
will give you years of trouble free service
if you keep it clean and free of built-up
dust or grime. Ensure that no air passages
get blocked. If they do, blow them out
with compressed air.
CAUTION: Unprotected eyes can be
injured by dust particles propelled by
compressed air. ALWAYS wear safety
glasses and a dust mask when cleaning
the sander with compressed air.
Plastic parts can easily be cleaned with a
damp cloth, but never use water to clean
any electrical parts. Solvents should also
be avoided on plastic because of the
possibility of damage.
If possible, use a scraper to remove glue
or sap from your work; these elements
may hinder the effectiveness of the
abrasive sheets and cause unnecessary
build-up of grime on the sander.
Keeping Tool Clean
Regular periodic maintenance on your
Model D3736 Palm Finishing Sander will
ensure its optimum performance. Make
a habit of inspecting your sander each
time you use it. Check for the following
conditions and repair or replace when
necessary:
• Extra Coarse. Loose fasteners.
• Extra Coarse. Worn switch.
• Extra Coarse. Worn or damaged cords and plugs.
• Extra Coarse. Worn or damaged sanding pad.
• Extra Coarse. Any other condition that could
hamper the safe operation of this
tool.
General