Sportline Heart RAte Monitor & Pedometer 965 - Manual (Page 8)

14 15
965 HEART RATE MONITOR + PEDOMETER
6. Adjust Upper Heart Rate Zone Range
by
PRESSING START/STOP/ (S/S) or RESET
(R) . Set and advance by PRESSING MODE .
7. Turn Fit Trac Reminder ON or OFF by
PRESSING START/STOP/ (S/S) or RESET
(R) . Set and advance by PRESSING MODE.
8. Adjust Fit Trac Reminder by PRESSING
PRESSING S/S or R . Set and advance by
PRESSING MODE.
9. Adjust Age by PRESSING S/S or R . Set and
advance by PRESSING MODE.
10. Select Gender by PRESSING S/S or R . Set
and advance by PRESSING MODE.
11. Select Unit of Measure (metric or
imperial) by PRESSING S/S or R . Set and
advance by PRESSING MODE.
12. Adjust Weight by PRESSING S/S or R . Set
and advance by PRESSING MODE.
13. Adjust Height by PRESSING S/S or R .
NOTE: The monitor automatically calculates your
Stride Length based on your height.
14. Set by PRESSING MODE . The display will
read “SAVED”.
Your Sportline 965 Heart Rate
Monitor+Pedometer is now ready for use!
SETTING TIME, CALENDAR AND USER PROFILE
The Sportline 965 Heart Rate Monitor+Pedometer uses your
personal profi le to calculate information specifi c to you. The
display in the programming sequence guides you through the
settings. You adjust the information being programmed by
PRESSING START/STOP (S/S) to increase or RESET (R) to decrease.
You set the information and advance to the next fi eld by
PRESSING MODE . The display reads “Saved” when this sequence
is complete. The monitor is then ready for use. You may exit the
Programming Sequence at any time by
PRESSING & HOLDING the
MODE key.
PRESS & HOLD the MODE key In Time of Day mode to enter the
Programming Sequence.
1. Adjust Hour by PRESSING START/STOP/
(S/S) or RESET (R) . Set and advance by
PRESSING MODE .
2. Repeat Step 1 to set Minutes, Seconds,
Month, Day and Year.
3. Select 12- or 24-hour time format by
PRESSING START/STOP/ (S/S) or RESET
(R) . Set and advance by PRESSING MODE .
4. Select Key Tone ON or OFF by PRESSING
S/S orR . Set and advance to personal
profi le by PRESSING MODE .
5. Adjust Lower Heart Rate Zone Range
by
PRESSING START/STOP/ (S/S) or RESET
(R) . Set and advance by PRESSING MODE .
NOTE: This is a % of Max Heart Rate (automatically
calculated by the monitor).
PROGRAMMING THE MONITOR PROGRAMMING THE MONITOR
PROGRAMMING THE MONIT OR
Increase: S/S
Decrease:R
Set & advance
to next setting:
PRESS MODE
Increase: S/S
Decrease:R
Set & advance
to next setting:
PRESS MODE
Increase: S/S
Decrease:R
Set & advance
to next setting:
PRESS MODE
SP1036IS01SPO.indd 14-15 SP1036IS01SPO.indd 14-15 7/10/12 6:19 PM 7/10/12 6:19 PM