Woodstock ALUMA-CLASSIC W1720 - Manual (Page 10)

ASSEMBLY
-8-
Installing Metal
Extension Wings
The SHOP FOX ® Heavy-Duty Metal Extension
Wings ( Figure 10) can be installed on the
Model W1720 79" rails.
Hardware Bag Contents: Qty
• Flat Washer 5 ⁄
16
" 12
• T-Bolt 5 ⁄
16
" -18 x 1" 12
• Hex Nut 5 ⁄
16
"-18 12
To install the W1720 extension wings, do
these steps:
1. Loosely install the T-bolts, washers and
hex nuts into the short sides of the exten-
sion wings.
2. Insert the T-bolt heads into the rail T-slots
as shown in Figure 11.
3. Slide the tables into place as shown in
Figure 12. Note—The tables slide into
place easily if you lift up while you slide
them into place.
4. Place a straightedge across the top of the
wings, and tighten the nuts behind the
edge of the extension wings to secure the
wings in place.
Figure 11. T-bolt and rail T-slot.
Figure 12. Sliding in the wings.
Figure 10. Extension wing box inventory.