Sony NW-S203F - Manual (Page 69)

NW-S203F/S205F.GB.2-699-315-12(2)
Troubleshooting
If the player does not function as expected, try the following steps to resolve
the issue.
1
Press the DISP/HOME button and  button at the same time for
more about 7 seconds to reset the player.
All the songs and settings stored on the player will not be erased even when you
reset it.
 button
DISP/HOME button
2
Find the symptoms of the issue in the following troubleshooting tables,
and try any corrective actions listed.
3
Check for information about the issue in SonicStage Help.
4
Look for information about the issue on one of the support Web sites.
For customers in the USA, visit: http://www.sony.com/walkmansupport
For customers in Canada, visit: http://www.sony.ca/ElectronicsSupport/
For customers in Europe, visit: http://www.support-nwwalkman.com
For customers in Latin America, visit: http://www.sony-latin.com/pa/info/
For customers in other countries/regions, visit: http://www.css.ap.sony.com
For customers who purchased the overseas models, visit:
http://www.sony.co.jp/overseas/support/
5
If the approaches listed above fail to resolve the issue, consult your
nearest Sony dealer.
Operation
Symptom Cause/Remedy
There is no sound.
 The volume level is set to zero.
 Turn the volume up ( page 9).
 The headphone jack is not connected properly.
 Connect the headphone jack properly ( page 11).
 The headphone plug is dirty.
 Clean the headphone plug with a soft dry cloth.
 No audio files are stored in the built-in flash
memory.
 If “NO DATA” appears, transfer audio file(s) from
the computer.
Troubleshooting
Continued 
Table of
Cont
ents
Inde
x
Menu