beautypg.com

Safety instructions the properly equipped operator – Shindaiwa T242/EVC User Manual

Page 3

background image

3

WARNING!
Use Good Judgment

ALWAYS wear eye protection to

shield against thrown objects.
NEVER run the engine when

transporting the unit.
NEVER run the engine indoors! Make

sure there is always good ventilation.

Fumes from engine exhaust can cause

serious injury or death.
ALWAYS clear your work area of trash

or hidden debris that could be thrown

back at you or toward a bystander.
ALWAYS use the proper cutting tool

for the job.
ALWAYS stop the engine immediately

if it suddenly begins to vibrate or

shake. Inspect for broken, missing

or improperly installed parts or

attachments.
NEVER extend trimming line beyond

the length specified for your unit.
ALWAYS keep the unit as clean

as practical. Keep it free of loose

vegetation, mud, etc.
ALWAYS hold the unit firmly with both

hands when cutting or trimming, and

maintain control at all times.
ALWAYS keep the handles clean.
ALWAYS disconnect the spark plug

wire before performing any

maintenance work.
ALWAYS, if a saw blade should

bind fast in a cut, shut off the engine

immediately. Push the branch or tree to

ease the bind and free the blade.

Safety Instructions

The Properly Equipped Operator

Always operate with

both hands firmly gripping

the unit.

Wear close-fitting clothing

to protect legs and arms.

Gloves offer added

protection and are strongly

recommended. Do not

wear clothing or jewelry

that could get caught in

machinery
or underbrush.
Secure hair so it is
above shoulder

level. NEVER
wear
shorts!

Wear hearing protection

devices and a broad-brimmed

hat or helmet.

Always

wear eye protection such

as goggles or safety glasses.

Keep away from the rotating

trimmer line or blade at all

times, and never lift a moving

attachment above waist-high.

Wear appropriate footwear (non-skid

boots or shoes): do not wear open-

toed shoes or sandals. Never operate
the unit while barefoot!

Keep a proper
footing and do
not overreach

maintain your

balance at all times

during operation.

Always

make sure

the appropriate

cutting attachment

shield is correctly

installed and in

good condition.

Figure 1

This manual is related to the following products: