Skuttle Indoor Air Quality Products 2000 - Manual (Page 9)

7
Replacement Parts and Service
If you need parts or service to maintain the superior performance of
your Flow­Thru Humidifier, follow these procedures:
Contact the heating and air conditioning contractor who installed
your unit. You may find this information stamped on the back cover
of this booklet, or on a label attached to your humidifier or heating
system.
If this information is unavailable, look in the phone book or on the
Internet under “Heating and Air Conditioning Contractors”.
Finally, if these attempts for parts or service fail, write, call or email
Skuttle at:
Skuttle Indoor Air Quality Products
101 Margaret Street, Marietta, OH 45750
800-848-9786 or 740-373-9169
[email protected]
•
•
•
Homeowner Tips
In a home that has had little or no humidification, allow approximately
three weeks for your new humidifier to reach the desired humidity
level. Your furniture, woodwork, carpeting, plaster, houseplants and
family members all need time to absorb lost moisture. To eliminate
drafts that allow heat and humidified air to escape, keep fireplace
dampers closed when not in use.
If excessive moisture appears on windows or walls, reduce the
humidity setting on your humidistat. If the situation continues, turn off
the water valve and consult your HVAC contractor. •
•
See Flow-Thr­­u Humidifier­­ par­­t lists and diagr­­ams,
beginning on page 8.