Sony DAV-HDX265 - Manual (Page 75)

A
d
v
a
n
ced
Settin
g
s a
nd A
d
justm
e
nt
s
75 GB
x [TRACK SELECTION] (DVD VIDEO only)
Gives the sound track which contains the highest
number of channels priority when you play a
DVD VIDEO on which multiple audio formats
(PCM, DTS, MPEG audio, or Dolby Digital
format) are recorded.
Note
• When you set the item to [AUTO], the language may
change. The [TRACK SELECTION] setting has
higher priority than the [AUDIO] settings in
[LANGUAGE SETUP] (page 72). (Depending on
the disc, this function may not work.)
• If PCM, DTS, Dolby Digital sound, and MPEG audio
tracks have the same number of channels, the system
selects PCM, DTS, Dolby Digital sound, and MPEG
audio tracks in this order.
x [MULTI-DISC RESUME] (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off.
x [AUDIO DRC] (DVD VIDEO only)
Narrows the dynamic range of the sound track.
Useful for watching movies at low volume late
at night.
x [AUDIO (HDMI)]
Selects the audio output status from the HDMI
OUT jack.
Note
• When you connect the unit and TV with the HDMI
cord and [ON] is selected, DYNAMIC BASS,
MOVIE/MUSIC, and sound field are not applied to
the sound that is output from the TV.
x [DivX]
(Except for United Kingdom and North
American models)
Displays the registration code for this system.
For more information, go to
http://www.divx.com on the Internet.
[OFF] No priority given.
[AUTO] Priority given.
[ON] Stores the resume settings in
memory for up to 40 discs.
[OFF] Does not store the resume settings
in memory. Playback restarts at
the resume point only for the
current disc in the unit.
[OFF] No compression of dynamic
range.
[STANDARD] Reproduces the sound track with
the kind of dynamic range that the
recording engineer intended.
[MAX] Compresses dynamic range fully.
[OFF] The sound is not output from the
HDMI OUT jack.
[ON] Outputs audio signals by
converting Dolby Digital, DTS, or
96 kHz/24 bit PCM signals to 48
kHz/ 16 bit PCM.