Sunway NT 2600 - Manual (Page 71)

147
EN
Declaration of Conformity as defined by the EMC guideline 89/336/EWG with
revisions 91/263/EWG and 93/68/EWG.
We herewith declare that the following product has been manufactured according to
the requirements outlined in the EG requirements on 89/336/EWG (EMC guideline with
revisions 91/263/EWG)
Product
Manufacturer
Type
from date of manufacture
applied standards Standard
Solar Inverter
Sunways AG, Photovoltaic Technology
Macairestr. 3 - 5, D - 78467 Konstanz
Sunways NT 6000, NT 4000, NT 2600
2003-05-15
EN 50082-2 (EN 61000-4-2, -4-3, -4-4, -4-6, -4-8)
EN 55014-1; EN 55011; EN 61000-3-2;
EN 61000-3-3; E DIN VDE 0126
Explanation
Maintaining the EMC guideline assumes an EMC adapted installation of the component within the plant or the machine.
Please pay attention to the installation notes of the technical specifications. Tests were carried out using a typical construction in
a test assembly that conforms with the stands. The legal requirements with regard to resistance to interference and to emission
of interference, limit values and standards are outlined in the above mentioned documentation.
These Sunways products are intended for installation into a PV-System. The test results are not applicable to every installed state
in every PV-System. This declaration therefore does not guarantee the EMC characteristics of the end product.
City, Date Roland Burkhardt,CEO
Konstanz, 2004-08-05