Speco Technologies EZVR4 User Manual

Page 5

background image

5

1. The package

2. Un-packed

MODEL NO.:

SER NO.:

MADE IN TA

IWAN

MODEL NO.:

SER NO.:

MADE IN TAIWAN

3. Take the unit out from the package

4. Put on a flat desk

5. Connect your camera cables to the BNC

connectors on the rear.

6. Connect your monitor cable to the BNC

connector labeled “Monitor” on the rear.

INSTALLATION

7. Connect the power adaptor.

8. Turn on the “Power” switch after the

cameras are installed. The EZVR4 will

then “boot” up and begin recording.