beautypg.com

General operation – SCI Scandicrafts A2840/R User Manual

Page 5

background image

4

The unit can be operated using either the wireless remote or the front control panel.

1. On the rear of the purifier, switch the master power to the “on” position (the front display

will light up).

2. Press the

ON/OFF button on the front of purifier to power on the unit. The fan will start.

3. Press the

Fan▲ and Fan▼ buttons to adjust the airflow speed to your desired level.

4. Press the

Purify▲ and Purify▼ buttons to set the purifier setting from Stage 1 through

Stage 5 to accommodate your desired level.

5. Press the

Sterilize button to operate the UVC and Photo Catalyst sanitize feature.

Press the

Sterilize button again to stop its operation. The UVC bulb will produce a

light blue glow on the inside of the unit when this feature is on.

Note: Do not look

directly at the UVC Bulb while it is operating.

6. Press the

Anion button to turn on the negative ion generator. Press the Anion button

again to stop the negative ion generator function.

Sleep Button

Press the

Sleep button to use the screen saving mode. This will turn most of the

display lights off. Press any button on the front panel to deactivate the sleep mode.
The working mode of

Anion, Purify, Sterilize, and Fan Speed will not change while in

sleep mode. If the timer function is set to turn the power off at a set time, do not use
the sleep function. The timer will only deactivate the sleep mode instead of shutting
down the unit if the sleep mode is on.

Time/Set Button

Read these instructions thoroughly before setting the time.

*** After 8-10 seconds of inactivity, the clock will be set or you will have to start the process again. ***

The clock is a 24-hour clock; 13:00 would be 1:00 p.m.

To set the current time:

1. Press the

Time/Set button twice. “Time” will blink on the display.

2. The

Purify▲ and Purify▼ buttons adjust the hours. The Fan▲ and Fan▼ buttons

adjust the minutes.

To set the power off timer:

1. While the unit is operating, press the

Time/Set button once. “Time/Set” will blink on

the display.

2. The

Purify▲ and Purify▼ buttons adjust the hours. The Fan▲ and Fan▼ buttons

adjust the minutes.

GENERAL OPERATION

OFF

ON

Power Switch Time Fan Speed Operating Display Operating Buttons

Sterilizer Feature Purifier Feature (5 Stages) Anion Feature

Remote

I-4506 BR7580R-1 6/25/07 7:57 AM Page 10