Sharp FO-DC535 - Manual (Page 5)

3
As a part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
Power consumption FO-DC535 FO-DC635
Standby: 9 W 9 W
Standby (all options installed):
16 W
16W
Maximum: 760 W 800 W
Dimensions Width: 21.5" (546 mm)
Depth: 16.2" (412 mm)
Height: 17.0" (431 mm)
(Not including paper tray or attachments)
Weight Approx. 48.5 lbs. (22.0 kg)
(Not including supplies, paper tray or attachments)
Important safety information
Be sure to save these instructions!
When using this equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to persons, including the following:
• CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger
telecommunication line cord.
• Do not disassemble this machine or attempt any procedures not described in
this manual. Refer all servicing to qualified service personnel.
• This machine must only be connected to a 120 V, 60 Hz, grounded (3-prong)
outlet. Connecting it to any other kind of outlet will damage the machine and
invalidate the warranty.
• Do not install or use the machine near water, or when you are wet. For example,
do not use the machine near a bath tub, wash bowl, kitchen sink or laundry tub,
in a wet basement, or near a swimming pool. Take care not to spill any liquids
on the machine.
• Use only the power cord provided with the machine. Do not use an AC
extension cord.