SoleusAir HC1-15-12 - Manual (Page 6)

MAINTENANCE
WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING.
CLEANING: IMPORTANT! DO NOT IMMERSE HEATER IN WATER! Clean the heater grills using the
vacuum brush attachment on your vacuum cleaner. This will remove lint and dirt from the inside of the heater.
DO NOT ATTEMPT TO TAKE HEATER APART. Clean the body of heater with a soft cloth.
CAUTION: Do not use gasoline, benzine, thinner, harsh cleaners, etc. as they will damage the heater.
NEVER USE ALCOHOL OR SOLVENTS.
SAFETY FEATURES
1. A thermal overload protector is built in to prevent overheating.
2. When an overheat temperature is reached, the heater will be automatically shut off. It can only resume
operation when the user resets the unit. (See RESET INSTRUCTION below)
RESET INSTRUCTION
Unplug the heater and wait 10 minutes for the unit to cool down.
After the 10 minutes, plug the unit in again and operate normally.
STORAGE
If the heater will not be used for a long period of time, store it in a cool, dry location when not in use. To
prevent dust and dirt build-up, use the original packaging to repack the unit.
TROUBLESHOOTING
If your heater shuts off unexpectedly or fails to operate, one of the above-mentioned safety features may have
activated to prevent overheating.
1. Be sure the power cord is plugged into a working electrical outlet.
2. Check your thermostat setting (High, Low, Fan setting). The heater may be off because it has reached the
desired temperature setting.
6