Sony WAHT-SA20 - Manual (Page 6)

6 US
Surround amplifier
(TA-SA200WR) (1)
Wireless transceiver
(EZW-RT10/EZW-RT10A) (1)
Speaker cords (2)
Operating Instructions (1)
Connect the surround amplifier to your
S-AIR main unit.
Before installing, make sure to
remove the AC power cords
(mains leads) of all S-AIR
products from wall outlets
(mains).
1
Insert the wireless transceiver
(supplied) in the slot on the rear
of the surround amplifier.
Note
• Do not touch the terminals of the
wireless transceiver.
• Match the direction of the V marks.
• Do not insert anything other than the
wireless transceiver into the EZW-RT10
slot.
Unpacking Hooking Up
EZW
-RT10
Rear panel of the surround amplifier