Shark LIGHT & EASY S3250CW - Manual (Page 5)

2 TOLL FREE: 1-800-418-0934 3 www.sharkclean.com
English Getting Started
a Upper Handle Tube with Backsaver
benefit
b Lower Tube
c Steam Mop Base
d 2 All-Purpose Cleaning Pads
e Filling Flask
f Funnel
ASSEMBLY
1 Remove all the parts from the
package. Verify all the listed parts
are included.
2 Slide the Upper Handle Tube (the
tube with the handle) into the Lower
Tube (the short tube). Push the two
extension tubes together until you
hear them click into place. (
fig. 1)
IMPORTANT: Never use the Light &
Easy™ Steam Mop without attaching
a micro-fiber cleaning pad to avoid
damage to your floor and mop.
When assembling your steam mop there
may be a little water in or around the
water tank. This is because we test all
our steam mops 100% before you
buy them, so you get a quality
Shark
® Light & Easy ™ Steam Mop.
3 Insert the assembled handle piece
into the steam mop base. Push the
tube base together until you hear a
click. (
fig. 2)
fig. 1 fig. 2
d
a
b
c
e
f
S3250CW_11_IB_ENG_100913.indd 2-3 10-09-13 10:57 AM