Sony CMT-U1BT - Manual (Page 13)

1 GB
Basic Oper
ations
CMT-U1BT.GB.2-683-494-11(1)
Listening to the radio
1
Select “FM” or “AM.”
Press TUNER/BAND  repeatedly.
2
Select the tuning mode.
Press TUNING MODE  repeatedly until
“AUTO” appears.
3
Tune in the desired station.
Press +/– (or TUNE +/– on the unit)
 . Scanning stops automatically when a
station is tuned in, and then “TUNED” and
“STEREO” (for stereo programs) appear.
When you tune in a station that provides
RDS services, the station name appears on
the display.
4
Adjust the volume.
Press VOLUME +/–  .
To stop automatic scanning
Press   .
To tune in a station with a weak signal
If “TUNED” does not appear and the scanning
does not stop, press TUNING MODE 
repeatedly until “AUTO” and “PRESET”
disappear, and then press +/– (or TUNE +/– on
the unit)  repeatedly to tune in the desired
station.
To reduce static noise on a weak FM stereo
station
Press FM MODE  repeatedly until “MONO”
appears to turn off stereo reception.