Sanyo 1180 - Manual (Page 15)

DMC 1180/DMC 2020 series MP3/WMA/SMV Player User Guide file:///D:/English/guide.htm
15 of 17 5/15/2008 3:39 PM
Display
128 x 128 Dot-Matrix 65K Color STN display
ID3 Tag display
Controls
Power On / OFF
Play / Pause
Stop
Skip Next
Skip Previous
A-B/Menu button
Volume +
Volume -
Hold Switch
Enter
Processor
75 MIPS DSP
Audio Playback
Windows Media Audio (WMA)
MPEG Audio Layer 3 (MP3)
Voice Recording
8 KHz to 16 KHz sampling rate
Each 128 MB memory provides about 8 hours recording (at default setting, 8 KHz)
Recording via on-board microphone or FM radio
FM Tuner
88 ~ 108 MHz
20 presets
Signal to Noise Ratio
> 90 dB
Frequency Response
20 Hz ~ 20 kHz
Output
< 4.4 mW (each output)
Total Harmonic Distortion Output
0.01% ~ 0.5%
Ports
USB Port
Phone Out
Firmware
Flash based. User upgradeable.
Safety
Listening to loud sounds for prolonged periods may permanently damage your hearing.
Before putting on the headphones, place them around your neck and turn the volume
down. Then put the headphones on and slowly increase the volume until you find a
comfortable listening level.
THE SANYO COMFORT WARRANTY
AUDIO PRODUCTS