Sony HDW-M2100 - Manual (Page 108)

Appendix
A-4
Appendix
Specifications
Analog Betacam playback
Video
Audio
a) Reference level: +4 dBm
Metal tape Oxide tape
Frequency response (at 10 dB
below reference level
a) )
50 Hz to 15 kHz +1.5 dB/ –3.0 dB 50 Hz to 15 kHz +3.0 dB
S/N ratio (at 3% distortion level) 72 dB or more 50 dB or more (Dolby NR off)
Distortion (THD at 1 kHz reference
level
a) )
1% or less 2% or less
Wow and flutter 0.1% rms or less 0.1% rms or less
LNG
AFM Frequency response (at reference
level a) )
20 Hz to 20 kHz +0.5 dB/–2.0 dB —
S/N ratio (at 3% distortion level) 85 dB or more —
Distortion (THD at 1 kHz reference
level
a) )
0.5% or less —
Processor adjustment range
Video level ±3 dB/ –
∞ to +3 dB selectable
Chroma level ±3 dB/ –
∞ to +3 dB selectable
Setup level (59.94i, 29.97PsF mode)
±30 IRE
Black level (50i, 25PsF mode)
±210 mV
Y/C delay ±100 ns (for analog Betacam tapes)
Chroma phase ±30°
System phase Sync: ±15 µs
SC: ±200 ns
Input connectors
REF. VIDEO INPUT
BNC (2 in loop through
connection)
Black burst or composite sync
0.3 Vp-p, 75
Ω, sync negative
Output connectors
HDSDI OUTPUT
BNC (3 including 1 for character
superimposition)
Serial digital (1.485 Gbits/s)
SMPTE 292M
SDTI OUTPUT BNC (2) (optional)
SMPTE 305M (SDTI)
COMPONENT VIDEO OUTPUT
BNC (1 set)
Y: 1.0 Vp-p, Sync negative
R–Y/B–Y: 0.7 Vp-p, 75
Ω, with
100% or 75% color bar selectable
COMPOSITE VIDEO OUTPUT
BNC (3 including 1 for character
superimposition)
1.0 Vp-p, 75
Ω, Sync negative
SDI OUTPUT BNC (3 including 1 for character
superimpositon)
Serial digital (270 Mbits/s)
SMPTE 259 M
Metal tape Oxide tape
Bandwidth Y 30 Hz to 4.5 MHz +0.5 dB/ –4.0 dB 30 Hz to 4.1 MHz +0.5 dB/ –6.0 dB
R–Y/ B–Y 30 Hz to 1.5 MHz +0.5 dB/–3.0dB 30 Hz to 1.5 MHz +0.5 dB/–3.0 dB
S/N ratio Y
R–Y/ B–Y 48 dB or more 45 dB or more
3% or less K factor (2T pulse)
3% or less
R–Y/ B–Y 4% or less
Y/C delay
51 dB or more 48 dB or more
LF non-linearity
20 ns or less
2% or less
Y